2015 RZR XP 1000 2 Seater - King of the Hammers Race Ready

909 Richardson Ave
Simi Valley, CA 93065
United States

$22,000.00 (Or Best Offer)
Shipping Info
Delivery Available in Southwest United States
Quantity Available

Selling Custom Built 2015 RZR XP 1000 2 Seater, Built primarily for King of the Hammers. Currently has 1600 miles on it. Comes ready to go, with a FOX IBP shocks (2.5” Front, 3.0” Rear), HCR A-Arms & Trailing Arms, Custom Cage, Shock Therapy Steering Rack, 12.5 Holz Racing Gear Reduction, Double Reverse Chain, Chromoly JE Reel Driveshaft, DC Customs Front Differential, RCV Pro Series II Axles, Factory UTV Skids, and TONS more (See Below).

In 2017, it landed a 13th place finish at KOH, and has proven to be an ultra dependable rig in any environment.

- Custom 1-3/4” .120” Wall DOM Cage (8 Point Mounting)
- 1/8” Aluminum Roof
- PRP Window Nets
- PRP 5 Point Harnesses
- Seats TBD
- Factory UTV Full 1/2” UHMW Belly Skid Plates
- Rugged 2x Parker Pumper
- Warn 3500s Winch w/ Mount
- Cagewrx Front Bumper w/ Winch Fairlead
- Custom Rear Bumper w/ Integrated Optional Spare Tire Carrier
- Drive Belt Blower (w/ Manual Override Switch)
- Reinforced HD Rear Crossmember
- Rugged Radios Race Radio & Intercom

All synthetic has been run in the engine and tranny, and changed just about every time the car was taken out.
Factory Demand Drive Fluid has always been used in the Front Differential, again changed frequently.

- UTV Inc HD Chromoly Motor Mount Bar
- Holz Racing Billet Motor Mounts
- Big Gun EXO Stainless Full Exhaust
- Big Gun Fuel Tuner

- Holz Racing 12.5 Transmission Gear Reduction kit
- Holz Racing HD Output Bearing Retainer
- Dual Reverse Chain Upgrade
- RCV 300M Output Shaft

- SXS Performance Billet Carrier Bearing
- JE Reel Chromoly Driveshaft

Front Differential
- DC Customs Stage 1 Kit (Output Hubs, Bearings, Sprague, and HD Armature Plate)
- DC Customs Stage 1 HD Pinion Bearing Upgrade

- RCV Pro Series II Axles Front & Rear
- Hess Motorsports Chromoly Hubs (Front & Rear)
- OEM Computer Flash
- Custom Tuned Clutch

- FOX IBP Shocks (2.5” Front, 3.0” Rear)
- HCR Racing Trailing Arms
- Custom .188” wall Chromoly High Clearance Lower Radius Rods
- Custom .120” wall Upper Radius Rods
- Custom Double Shear Rear Radius Rod Mount (Chassis Side)
- HCR Racing Front A-Arms (Upper & Lower) w/ 7/8” Uniball/Spindle Pin Upgrade
- Gusseted Front Upper & Lower Chassis side mounts
- Currie Rear Sway Bar w/ Short Course and Desert/Rock Bars

- Shock Therapy USA HD Steering Rack
- Cognito HD Tie Rod Kit
- Removable Quick Release Steering Wheel

- 33” Yokohama Super Digger III Tires (5 included)
- 15” KMC Machete Beadlock Wheels (5 included)

This rig is built to handle anything you can throw at it. It’s been super reliable the last few years, and whether you’re looking to race, or just looking to have fun without having to worry about your rig, this is a great vehicle for you.

I also have tons of spares available if interested.

Currently asking $22,000, but I will consider any reasonable offer, depending on what you want with it. Not interested in trades. Call or text Jami (any time) at (805) 587-7426
Click here to visit Raceline Wheels
Click here to contact GenRight Off Road.
Click here to contact California Coach Works.
Click here to contact Westside Motorcoach.
Click here to visit Rugged Radios
Click here to visit PSC
Click here to contact Money Pit Classifieds for advertising opertunities.