07 JKU with tons, 42s, cage etc


109 WOODGROVE LN
Cary, NC 27518
United States

Price
$45,000.00 (Or Best Offer)
Condition
Used
Quantity Available
1
Category  Off Road Vehicles > Jeep > JKU

Description
2007 JKU RUBICON
VIN# 1J8GA69137L145108
All work completed between late 2018 and mid-2019 unless otherwise noted.

Engine and Exhaust
505 Perfromance’s 4.1 stroker engine with Forged internals, a stage 3 cam and extra head work. (3500 miles on it) around 320hp and 355+ ft lb of torque
AC completely overhauled and replaced in July of 2020
• Ripp 07-11 3.8L Wrangler Refresh Pack installed in August of 2021
• Diablo tuner
• Custom torque converter with LS internals.
(8:1 multiplication vs 4:1 stock) and a 2500 stall

• AFE long tube headers with racing cats.(48-46214-YC twisted steel header and Y-pipe)
• MagnaFlow 17125 Large Stainless Steel Performance Exhaust System Kit
• K&N CAI
• Brand new OEM TIPM and ECU installed by the dealership in 2020
• New Mopar OEM O2 sensors in December 2020
• New copper exhaust collector gaskets in July 2022
• New radiator and fan in August 2021
• New fuel sending unit with Gen Right leg extension kit in August 2021
• Relocated gas tank to rear using Jeep Speed Shop kit, 2005 TJ Tank, Genright access door, Genright leg extension kit.
• Genesis Dual Battery Kit - December of 2020
• Genesis G screen monitoring system
• 2 new Die Hard Platinum AGM batteries July 2022
• 320 AMP JH Alternator powder coated black with big 3 wiring kit upgrade – new in August 2022

Steering and Drivetrain
• PSC hyrdro assist steering
• Fusion 2.5 ton steering
• WFO Customs high steer arm – passenger side
• Artec Superduty High Steer Cap/Spacer -driver side
• Reid knuckles (passenger and driver side)
• Atlas 4.3:1 T case December of 2021
PSC power steering and transmission cooler
• New Adams Driveshaft JK front & rear 1350 CV (extreme duty) with solid U-joints in July 2020.
• Adams high angle front drive shaft (was going to swap it out and keep the other as a spare)

Armor and Bumpers
• All Motobilt armor installed in July 2020
• Motobilt Crusher series front bumper with stinger
Motobilt Stubby rear bumper for JK/JKU
• Motobilt Front and rear Crusher fender package for JK/JKU
• Motobilt Unlimited rocker armor for JK/JKU
• Motobilt Crusher series rocker guards w/ step for jeep JKU 4dr
• Motobilt Rear corner armor with Genright frenched in corner guard taillight kit and Maxbilt lights.
• Clayton full belly oil pan and transfer case skid
• Jeep Speed Shop gas tank skid (for relocated tank mentioned above)
• GenrIght fuel pump access panel

Cage
• Genright Cage for a 4 door JK
• Bestop Trektop Adapter for GenRight Cage
• Custom overhead switch panel with interior led lights
• Motobilt rear cargo tray powder coated black

Suspension

• 3 link in front and dual triangulated 4 link in the rear. It was built with aluminum links by Wide Open Design (2.25” lower and 1.75” uppers) and Ballistic Fab Forged Chromoly 2.63 in Ballistic Joints (1.25” lower and 7/8” uppers)
• Fox 2.0 14” coilovers PAC springs front (14x2.5 x 225 on top and 14x2.5x275 on bottom) and rear (14x2.5x225 on top and 16x2.4x250 on the bottom)
• Fox 2” hydraulic bump stops all four corners
• PAC Racing sway bar (antirock kit) front and rear
• Ruff Stuff Ass Vault limit straps front and rear

Interior
• Maxbilt Command Center Console
• VOS 8 switch switch control system wired to overhead custom panel switches
• Digital gauge cluster by Carbotor
• Pioneer NEX 4201 with apple car play with all new kikr speakers and 4 wake tower speakers and subs. Crazy loud.
• G screen for Genesis dual battery set up
• GMSR Radio
• Custom trim and shifters
• Carolina Metal Masters Grab front loop handles mounted to Genright Cage
• PRP steering wheel (removable)
• PRP Enduro Elite recliner seats front and rear
• PRP 4 point harness front and rear
• New Armorlite flooring kit (front and rear)
• Bartact TAOFEH - Roll Bar Fire Extinguisher Holder steel bracket
• H3R Performance MX250B Fire Extinguisher
• PowerTank PT10-5200-MBK Basic Package Portable CO2 Air Tank System
• Backup Camera 10" Mirror Dash Cam, Dash Cam Front and Rear Full Touch Screen Video Streaming Rear View Mirror Camera,Night Vision Waterproof 1080P Rear Camera
• Denton Racing aluminum dash side panels
• Fishbone flashlight holder driver and passenger side

Exterior
• Genright B pillar Chop
• Professionally Raptor lined black with light gray trim in September of 2020
• BestopTrektop NX Black Twill Soft Top 4-door 5685317
• Bestop black diamond bimini top 5258135
• Alien sunshade
• 10th Anniversary Hood
• Bak-Pax Tailgate Delete with two 3.5 gallon rotopax fuel cans and rear facing lights
• JW Speaker headlights
• Max-Bilt Jeep Wrangler Round Trail Tail LED Tail Lights
• Gatekeeper knuckle pod and Baja Pro S1 amber lights
• MINGLI Side View Mirror Kit Rear View Mirror Housing with Turn Signal Light for JEEP JK JKU 2007-2016 on full doors
• RGB rock light kit
• WARN 103253 VR EVO 10-S Electric 12V DC Winch with Synthetic Rope installed in July 2020
• Factor 55 Ultrahook
• Factor 55 1.5” Hawse Fairlead
• Mopar half doors raptor lined to match with Tactical door handles and side view mirror lights
• New Mopar door kits exterior half door uppers (front and rear set)


Axles/Hubs
• 05+ Dana 60 super duty axles with Artec truss in the front with Reid Knuckle and WFO high steer arm on passenger side. Reid knuckle and Artec Industries high steer cap on driver side.
• Upper and lower ball joint delete by American Iron Off Road
• 35 spline 4340 stubs 1550, custom 4340 1550 inners and Spicer joints by Rhodes Diff
• Warn Hubs
• Shaved Sterling 10.5 Full Float rear axle with Balistic Fab Truss kit (gas tank relocated)
• ARB locker front and rear
• ARB compressor
• 5.13 Revolution gears with koyo master install kit
• Ratchet strap tie-downs - Axle Bracket front and rear

Brakes
• Brand new brakes, rotors, calipers etc. in August 2021
• Fully functional ABS and traction control (new speed sensors all the way around in 2022)
• J8 Brake Boost kit (new in October 2021)
• Timken wheel bearing and hubs
• Fusion 4x4 e brake cables for Sterling rear axle
• Wildwood 2 psi (blue) residual brake valve (not installed)

Wheels/tires
• 4 - 42” Nitto Trail Grapplers (2 brand new, 2 with 3 trips on them)
• 4 - 20” KMC Grenade with 3.61” backspace
• 1 - 40” Nitto Trail Grappler on a 17” Raceline as a spare
The 42s and KMCs are new with a shakeout trip on them
Photos
Click To View Click To View Click To View Click To View
Search
Click here to visit Raceline Wheels
Click here to visit R1 Concepts