2017 F250 Lariat Prerun/Chase support truck. 6.7 Powerstroke.
Diesel Power Products
5204 E Broadway Ave
Spokane, WA 99212
We built this truck with the premise that we wanted a truck that would do everything we could ever want to throw at it. We kept it low so it would feel stable but threw a slew of high quality suspension parts at it. It is rocking the Carli Pintop kit with 2.5" Kings all the way around. It is a 2.5" lift kit with the fabricated radius arms and full race packs out back. In order for the struck to maintain it's towing capabilities we added a set of Hellwig Big Wig air bags which have 14" of drop out so they don't limit any of the wheel travel but make the truck capable of towing whatever load you would like to throw at it. In order for this truck to be set up as a tow rig we added a B&W gooseneck hitch to complement the factory Class V hitch. This truck has a one off Dynatrac ProRock 80 rear with air locker and Chromoly shafts. We swapped in the 80 reusing the factory hubs and brake backing plates so all service items would be factory We swapped to the ProRock so we would be able to run the gear ratio that we wanted to account for the 40x15.50r20 Nitto Trail Grapplers on 20" Bronze Method NV wheels. The front is matched to the rear with and ARB air locker as well. We are running 4.88 gears which are perfect for this truck to be able to cruise the freeway's easily while still being able to haul whatever load we wanted to hook to it. The modifications don't end there. In order to clear the 40" tires we used a set of LGE/CTS Front fenders and bedsides. Matching up to that are Rogue Racing bumpers front and rear with Baja Designs lighting all around. In case there is need for recovering your friends out on the trail or deep in the silt in Baja there is a Warn Zeon 12-s platinum tucked into the front bumper. This truck was built to stay emission intact and has done so while still putting down almost 500rwhp. It competed in the UCC qualifier category and was driven to the event hauling a trailer to and from. Engine upgrades include S&B cold air intake, Dynomite diesel balanced eco injectors, No Limit fabrication upgraded Intercooler, MBRP particulate filter back exhaust, and EZ Lynk emissions friendly tuning with trans tuning. It is currently on the 35hp tune but was on the 65hp tune for the UCC. To monitor all the engine vitals we have added and Edge Insight CTS2 monitor. The bed is covered with a trifold hard tonneau cover. To make getting in and out of the truck easier we added a set of Amp Research power steps. The only other upgrades are the BD throttle sensitivity booster and an ARB twin air compressor. This is a 2017 Ford Super Duty F250 Lariat. It has the black leather interior with all of the upgrades to include the full roof sunroof, combo lock center console, Nav, heated and cooled seating as well as heated steering wheel, vinyl floors which is really cool for any rig that spends time in the dirt, and adaptive cruise control. The mileage is 15450. All of the decals have been pulled off of the vehicle but I added some photo's of the truck on the trail out in Moab. This truck has worked awesome for everything we have thrown at it. We have too many vehicles in the fleet and it isn't getting used. To duplicate this truck you would be well into the 6 digit range. Reasonable offers please, you see the asking price it is well worth that.
Power Products Unlimited
5204 E Broadway Ave
Power Products Unlimted Inc. is proudly located in Spokane, WA and is the parent company for Diesel Power Products, Offroad Power Products, and Fuel Bomb Diesel Additives. We are a growing automotive supplier in both the on and off-road market.
Originally founded in 1999 as Diesel Power Products, the original division of Power Products Unlimited, began its roots in the diesel performance industry by offering a select line of air improvement products and have grown to now offer you thousands of products from hundreds of manufacturers all based upon the original core principles we were founded on, quality. In 2010, we realized the need to expand fully into the offroad market. For years, we were offering high-grade suspension components and kits for light duty diesels on our Diesel Power Products website, but most of those manufacturers also offered numerous parts for other applications. And because of this, Offroad Power Products was born! Since this time, we have sought out the best and brightest companies in the offroad market to ensure we are able to offer you nothing but the highest quality parts available.
We pride ourselves in having constant, direct communication with the manufacturers whose products we represent in order to ensure you receive parts we would feel confident installing on our own vehicles, and in many cases, already have. By having these types of great, personal relationships with our suppliers, we are able to be at the forefront of new and upcoming products, as well as offering you the absolute best customer service in the industry.