4x4 ultra4 4400 ifs kit for sale.

Chino, CA 91710
United States

Quantity Available

I have a jimmys4x4 ifs kit for sale. This is the same front end they are running on their 4400 cars. The kit was previously used but comes sand blasted and reassembled. There's a ton of fab work in this kit, all the arms are internally gusseted, aswell as the base plate and rack/shock mounts. I am converting to portals and unfortunately can't use this kit.

The following parts are spidertrax:
35 spline 6x5.5 5/8 unit bearings
Series 30 35 spline outer stub axles
Series 30 35 spline inner stub axles
A set of builder bells
Ifs 9" front center diff.
300m mid axle shafts cut to length for this kit.

The kit comes with the steering system shown in picture with the center rack mount, and hydraulic steering rack.

The rear axle is a spidertrax 4" housing with a truss, and builder ends to mount spidertrax unit bearings to. It has a bracket kit installed for a 4 link with fairly nice bumpstop pads, brake mounts, and mount for limits/sway bar.

I'm asking $25k for the kit with the listed parts above and $2k for the rear axle. Shocks are not included. Serious inquiries only/ please be aware of what these kits cost. New from jimmys this is a $52k kit without unit bearings, or steering parts. Most 4x4 ifs kits out there are 30k just for the fabricated parts.

Ultra 4 4400 4500 4800 ultra4 long travel ifs fis offroad racing prerunner trophy truck gearworks gear works Spidertrax spydertrax rcv

You can email me at integrityautoco@gmail.com for more pictures
Click To View Click To View Click To View Click To View Click To View Click To View Click To View Click To View Click To View
Click here to visit R1 Concepts