JKU (4 DOOR) FULL ROLL CAGE KIT
GenRight Off Road
4535 Runway St.
Simi Valley, CA 93063
For pricing visit www.genright.com and use MONEYPIT10 for 10% Off this product
This laser cut and puzzled Roll Cage Kit (un-welded) from GenRight Off Road for the Jeep Wrangler JKU (2007-2018).
We use the latest Laser Cutting and CNC Tube Bending technology to build this cage from heavy duty 2" diameter DOM tubing and features solid 8-point mounting for maximum protection (unlike any other cage on the market).
This is the best most protective, complete replacement, weld-in (not bolt in) cage available making it the safest cage on the market for a Jeep Wrangler JKU.
All the tubes are cut to length and notched to fit together like a "puzzle." You just need a (MIG or TIG) welder to put it all together.
Made from 2" diameter heavy duty x .120" wall D.O.M. (Drawn Over Mandrel) seamless tubing..
Laser Cut and notched CNC bent tubes, with additional keying for fool-proof assembly and a precision fit.
Solid 8-point mounting for maximum safety by adding an additional pillar behind rear seats to protect passengers .
Designed for maximum visibility with an ultra low profile dash bar.
Only minor trimming of plastic dash end caps is needed and is not visible when cage is installed.
Front doors do not rub the sides of the dash after cage is installed (like other cage kits).
Fits under both, factory hard and soft tops.
Can be used with metal (full or half) doors or soft doors.
Pre-welded heavy duty cage to tub mounting brackets are laser cut and formed.
Each tube has the part number laser etched into it, so there are no mistakes.
2 grab handles are included for the front (grab handles for the rear passengers are optional).
Includes mounting brackets to retain all the factory seat belts.
Includes all necessary mounting hardware (Grade 8)
Includes very detailed step by step installation instructions (can be installed in 2 days).
Jeep JK Dome Light Housing (For GenRight Cages)
Jeep JK Soft Top Adapter for GenRight Roll Cage (4 Dr.)
Jeep JK Detachable B-Pillar Kit
JK (4 Door) Aluminum Roof for GenRight Roll Cage
This kit was designed to be used with all the options (X-bar and V-bar). We strongly urge you to install these bars for the cage to provide it's best protection.
This kit is sold un-welded, requiring welding by the end user in the vehicle.
This kit requires complete removal of the stock roll bar (and most of the interior for install).
After welding the cage, the cage can be removed for powder coating.
It is possible to re-fit most of the stock interior plastic (including the sound bar), but it will take some work to trim the plastic nicely.
Some trimming of the rear door panel (on factory hard doors) will be necessary to clear B-pillar tubes.
Adding a roll cage to a Jeep is not a guarantee of safety. However, this is a substantial upgrade from the factory cage.
We also offer a A-pillar upgrade (GRC-8005) to be used with our aluminum Dash upgrade (DSH-8030)
We offer an adapter bracket kit to run a Bestop TrekTop (GRC-8065) too.
Please note - If this cage is shipping to a residential address, you will be charged an additional shipping fee of up to $100 for proper delivery.
Interested in buying a FULLY WELDED Roll Cage from GenRight? Call us at 805-584-8635 for a price!