2007 JKUR 6.2 Atlas Kings Ton's 40's

What we have here is a very heavily modified 2007 Jeep Wrangler Unlimited Rubicon. The list of upgrades and modifications goes on and on, But, here are the basics....

Drivetrain
6.2 L L94 Out of a 2014 Cadillac Escalade. Engine has received a cam upgrade with D.O.D delete. Engine is estimated to make right around 500hp.

Engine mounts, accessory brackets, Radiator and Wiring harness are all from MoTech.

Backing the engine is a 6 speed Automatic (6L80E).

Rounding out the drivetrain is an Atlas Transfer case with a 3:1 low range.

Front Axle/Suspension
Dana 60 with 4.88 Yukon Ring and pinion, Yukon Zip Locker, TMR Diff cover, 1550 axle shafts, Warn Lockouts, Wilwood 4 piston Calipers. Steering is done by a full PSC Hydraulic assist setup, Rare parts tie rods, TMR Hi steer arms.
Axle is located by a custom 3 Link suspension using components from both Artec and Genright. Supporting this beast is a pair of King 12"x2.5" coilovers and King 2.0 Bumpstops. Suspension droop is limited by a set of ORW limiting straps.

Rear Axle/Suspension
Sterling 10.5" fitted with Yukon 4.88 gears, Yukon Zip Locker. The axle was outfitted with a Unit bearing conversion, Branik double Spline axle shafts and Warn Lockouts. It also received Wilwood 4 piston Calipers.
Suspension consists of Genright Elite Double triangulated 4 link with 14"x2.5" King coil overs and 2.0 King bump stops, ORW Limiting straps.

Misc/Other
Genright rear mounted gastank
Genright Rollcage
Poison Spyder rear tire carrier
MasterCraft seats
Adams 1350 Driveshafts
Dirtylife Beadlock Wheels
40x13.5x17 Toyo Opencountry M/T tires
Artec Rock Sliders
SmittyBilt Bumpers
Warn Zeon 10,000lb winch
Bushwacker Fender Flares
Armorlite Flooring
Rock Lights
Onboard air system
Edge insight CTS3
Kenwood stereo with front and rear camers's
Custom front inner fenders
Custom vinyl wrap.
Custom Switch panel/Fusebox


The jeep was completely stripped down to the bare frame and everything was repaired or replaced and freshly painted.

The Jeep was built to be driven and 4 wheeled with reliability and ease of parts in mind. The build process took 2 years with $90,000+ invested and now has bout 3000 miles on it. The only reason for the sale is due to an unfortunate passing of one of the owners.

Included in the sale........
Spare parts/xtra's
Multiple tops
Tube doors
Racing harness'
and much more....

We are asking $64,950 and are open to reasonable offers.

https://www.facebook.com/marketplace/item/1018698299164693

More pictures are available on request.